Crestron CHV-TSTATEX Guia de Instalação descarregar pdf (Página 75)

Crestron CHV-TSTAT and CHV-THSTAT Thermostats

Operations and Installation Guide – DOC. 8163E Thermostats: CHV-TSTAT and CHV-THSTAT

•

Slab 1 and Slab 2 Systems

Pressing the MODE button allows the user to access the following screens when the thermostat is

configured for Slab 1 and Slab 2 systems.

“Slab System Mode” Screen

MODE

VIEW



Slab System Mode

HEAT OFF

The “Slab System Mode” screen appears when the MODE

button is initially pressed.

Use the up ▲and down▼arrow buttons to select HEAT or

OFF.

“Fan Mode” Screen

MODE

VIEW



Fan Mode

AUTO ON

Pressing the MODE button again displays the “Fan Mode”

screen.

Use the up ▲and down ▼arrow buttons to select AUTO or

ON.

NOTE: In AUTO, the fan runs only when the system calls

for heat or cool. In ON, the fan runs continuously.

“Humidifier” Screen

MODE

VIEW



Humidifier

ENABLED DISABLED

Pressing the MODE button again displays the “Humidifier”

screen.

NOTE: This page only appears if enabled in the “HUM

OPTS” setup screen.

NOTE: CHV-TSTAT requires additional remote humidity

sensor (CHV-RTHS, sold separately).

Use the up ▲and down ▼arrow buttons to select

ENABLED or DISABLED.

“Crestron System” Screen

MODE

VIEW



Crestron Sys

ONLINE HOLD

Pressing the MODE button again displays the “Crestron

Sys” (Crestron system) screen.

Use the up ▲and down ▼arrow buttons to select ONLINE

or HOLD.

• ONLINE: Data flows both ways, to and from the

thermostat, enabling adjustment from a remote location.

• HOLD: Data flows one way, from the thermostat, blocking

system commands to change the temperature and humidity

when the current settings should not be reset. Restores to

the last command sent when online is re-engaged.

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 91 92

Comentários a estes Manuais

Sem comentários

Crestron CHV-TSTATEX Guia de Instalação Página 75

Comentários a estes Manuais

Manuais e produtos relacionados com Termóestatos Crestron CHV-TSTATEX