Crestron Lighting Design Guia de Instalação descarregar pdf (Página 28)

230 V Lighting Design Guide

Doc. 4859C | crestron.com

Crestron Network Block (CAEN-BLOCK) provides four termination ports for Cresnet wiring. The unit also has two

5-pin connections that provide communication to the modules. The contact closure override signals that produce

an emergency override of the modules are also sent through these connections. The override connector provides

external dry contact closure inputs directly to the 5-position Cresnet interconnect connectors, LEFT and RIGHT.

When a switch contact closure is received between the G connections and the L or R connection (R is used in a

double-wide enclosure only) on the CAEN BLOCK, the respective left or right column of modules will set the lights to

the programmed emergency over-ride state. The override connector is rated at 5 volts, 10 mA maximum.

The CAEN-BLOCK unit is a pass-through device with a Cresnet power factor of zero.

CAEN-BLOCK

Network Block Dimensions and Weight

Height Width Depth Weight

5.08 cm 15.24 cm 4.45 cm 1.54 kg

CAEN-BLOCK Location and Orientation within a Single-Wide Enclosure

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 81 82

Sem comentários

Crestron Lighting Design Guia de Instalação Página 28