Crestron STRFGWX Especificações descarregar pdf (Página 14)

2-Way RF Wireless Touchpanel Crestron STX-1700C

NOTE: The RF TEST MENU button should only be used under supervision from

a Crestron customer service representative during telephone support.

After the Cresnet ID, RF ID and RF Channel settings have been verified, touch the

Return button at the bottom of the screen to save settings and display the SELECT

INTERFACE screen.

KEY CLICK SETUP

Key Click Setup

From the SETUP MENU, press the Key Click Enabled button to open KEY CLIC

SETUP screen. (If the function is currently disabled, the button legend is “Ke

Clic

Disabled.”) To enable an audible tone (beep) when the touchpanel buttons are

pressed, select among the Short, Med, or Long KEY CLICK ENABLE/LEN

uttons to set the duration of the tone. The touchpanel responds with a corresponding

signal. To disable the feature, select Click Off.

Use the KEY CLICK VOLUME UP and DOWN buttons to increase and decrease

the volume of the signal. The area to the right of the buttons shows the relative

volume from 0% to 100%, both as a numeric value and, for a quick visual reference,

as an analog bar.

Select the Return button to return to the SETUP MENU.

SCREEN SETTINGS -

BRIGHTNESS

Brightness

From the SETUP MENU, press the Brightness button to open the SCREEN

SETTINGS – BRIGHTNESS screen. The UP and DOWN buttons increase and

decrease screen brightness, respectively. The area to the right of the buttons shows

the relative brightness from 0% to 100%.

Select the Return button to return to the SETUP MENU.

STARTUP PREFERENCE

Startup Preference

The Startup Preference option allows (when the touchpanel is off or in standby) the

display to come on or stay off when a “quick” pushbutton is pressed. From the

SETUP MENU, press the Startup Preference button to open the STARTUP

PREFERENCE screen.

When pressed, the DISPLAY ON FROM HARDKEY button toggles between

ENABLED and DISABLED. With ENABLED selected, the display comes on when

one of the “quick” pushbuttons is pressed. With DISABLED selected, the display

stays off when a “quick” pushbutton is pressed (if touchpanel was off, it goes to

standby). The default is DISABLED.

Select the Return button to return to the SETUP MENU.

10 • 2-Way RF Wireless Touchpanel: STX-1700C Operations Guide - DOC. 6049

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Sem comentários

Crestron STRFGWX Especificações Página 14