
Crestron STX-1700C 2-Way RF Wireless Touchpanel
Identity Codes
The STX-1700C touchpanel uses three distinct types of identity (ID) codes: Cresnet
identity (NET ID), RF ID, and RF CHANNEL. These codes are assigned to the
touchpanel from the Cresnet Interface menu when the unit is configured. Refer to
“Setup Menu” on page 8. For the touchpanel to be identified within the Cresnet
system, these assignments must match assignments made in the SIMPL Windows
project.
NET ID
Every equipment and user interface within the Cresnet system requires a unique NET
ID. These codes are recognized by a two-digit hexadecimal number from 03 to FE.
The NET ID of the unit must match the NET ID specified in the SIMPL Windows
program when operating as a wired touchpanel (optional, recommended for testing).
The NET ID is used when the touchpanel is wired directly to the control system
during uploading a VT Pro-e project or upgrading the touchpanel firmware.
RF ID
Every STX-1700C touchpanel communicating with a Cresnet control system via a
STRFGWX requires a unique RF ID to secure RF communications. There are 15
useable codes for multiple touchpanel(s) ranging from 1 to F (hexadecimal number).
The RF ID of the unit must match the RF ID specified in the SIMPL Windows
program. For roaming details, refer to “Modifying a SIMPL Windows Program for
Roaming” on page 22.
RF CHANNEL
Each STX-1700C touchpanel communicating to the STRFGWX transceiver must
have a RF CHANNEL that matches the RF CHANNEL of the STRFGWX. There
are 16 possible RF CHANNELS ranging from 0 to F (hexadecimal number).
NOTE: A single RF CHANNEL may be used by more than one STRFGWX when
multiple transceivers are used to expand the roaming capabilities of a touchpanel.
For more information, refer to the latest revision of STRFGWX Operations Guide
(Doc. 5811) available from the Downloads | Product Manuals section of Crestron’s
website (www.crestron.com)
.
Operations Guide - DOC. 6049 2-Way RF Wireless Touchpanel: STX-1700C • 7
Comentários a estes Manuais