Crestron TPS-5000L Guia de Instalação descarregar pdf (Página 8)

Video Card for TPS/Lectern Panel Crestron TPS-VIDL-1/TPS-VIDL-2

Connector Specifications of the TPS-VIDL-1/VIDL-2 (continued)

PORT TYPE SIGNAL(S)

Y+ 6-pin connector, 3.5 mm S-Video luminance input or

composite input #1

Y- 6-pin connector, 3.5 mm S-Video luminance return

or composite return #1

Y S 6-pin connector, 3.5 mm S-Video luminance shield

(Balanced Video only)

BNC S-video chrominance or

composite input #2

COMP / Y BNC S-Video luminance or

composite input #1

Physical Description

The TPS-VIDL-1 and TPS-VIDL-2 card, shown in the following

diagrams, is a printed circuit board (PCB) that is designed for installation

into a dedicated expansion slot on the touchpanel motherboard. The card

contains a 60-pin connector that attaches directly to the motherboard and

is secured with four mounting screws (supplied with each model of the

video card). Video access is through two BNC connectors or a 6-pin

mini-phoenix connector that are permanently attached to the

TPS-VIDL card. The connectors (individually labeled in the NTSC/PAL

INPUT section of the touchpanel) are accessible from the connector

panel at the rear of the touchpanel case. Refer to the following diagrams

for physical dimensions.

TPS-VIDL-1/VIDL-2 VIDEO CARD (TPS-VIDL-2 Shown)

4 • Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2 Operations & Installation Guide - DOC. 6070

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Sem comentários

Crestron TPS-5000L Guia de Instalação Página 8