Crestron TPS-5000L Guia de Instalação descarregar pdf (Página 13)

Crestron TPS-VIDL-1/TPS-VIDL-2 Video Card for TPS/Lectern Panel

Install TPS-VIDL-1/VIDL-2

7. Press the TPS-VIDL-1/VIDL-2 until the connector pins are

fully seated. DO NOT force pins into connector. Make sure

that the mounted screws align with the mounting posts of the

motherboard.

8. Tighten the card mounting screws to finger-tight.

CAUTION: The TPS-VIDL-2/VIDL-2 connectors may have to be

aligned slightly to fit through the openings in the rear cover. Align the

connectors of this card (or any other optional card that is installed)

carefully to prevent damage to the card, cover, or touchpanel.

9. As shown in the following diagram, install the touchpanel rear

cover by sliding it over the TPS-VIDL-1/VIDL-2 connectors.

Operations & Installation Guide - DOC. 6070 Video Card for TPS/Lectern Panel: TPS-VIDL-1/TPS-VIDL-2 • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

Crestron TPS-5000L Guia de Instalação Página 13