Crestron CT-1550 Especificações descarregar pdf (Página 23)

Crestron CT-1550 Wired 5.7 Inch Tabletop Touchpanel

Operations Guide – DOC. 6116A Wired 5.7 Inch Tabletop Touchpanel: CT-1550

• 19

Upload via Crestron Viewport

1. Verify that the procedure for “Communication Settings” that begins on

page 16 has been performed.

2. As shown after this step, select File Transfer | Send Program

(alternatively, press Alt+P) from the Viewport menu.

File Transfer | Send Program Command

3. The “Send Program” window appears, as shown after this step. Click

Browse, locate the compiled file (.spz) and click Open. This will

display the program's header information and enable one or both of the

What to Send check boxes. If the program does not contain any

SIMPL+ modules, only the SIMPL Program check box will be

enabled. If it does contain SIMPL+ modules, then the SIMPL+ check

box will also be enabled. Select one or both check boxes and then click

Send Program to begin the transfer.

NOTE: Refer to the respective Operations Guide for the control system for details

about the other fields shown on the “Send Program” window.

“Send Program” Window

4. To verify that the program has been transferred successfully, select

Diagnostics | Report Program Information. This should display a

window that provides details about the current program loaded into the

control system.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 31 32

Sem comentários

Crestron CT-1550 Especificações Página 23