Crestron CPU2 Especificações descarregar pdf (Página 35)

Crestron RACK2 2-Series Card Cage System

Slots 1 through 4: C2Z Card Slots

The Z-Bus slots enable the addition of 10/100 Ethernet applications.

NOTE: Currently, only one C2ENET card is allowed in slot 1. Other Z-Bus cards

will be available in the future.

To prepare for communicating with other devices via the Z-Bus port using a

C2ENET-1 or -2 card, you must set up an IP table to identify the IP address and port

ID for each of those devices. For detailed information, refer to “Creating an IP

Table” in the Crestron e-Control Reference Guide (Doc. 6052). The latest version is

available as a PDF on the Crestron website (www.crestron.com).

Slots 5 through 16: C2Y Card Slots

The Y-Bus slots support existing CNX and 2-Series control cards (except the

X-Generation CNXCOM-2 card) and permits adding multiple IR, serial

communications, and/or relay ports to the control system.

Slot 17: C2I-RACK2-HUB

This slot is a representation of the Cresnet Hub Card NET2. No programming is

required.

Slot 18: C2Net-Device

The C2Net-Device slot enables the RACK2 to control up to 252 Cresnet devices.

Each Cresnet device is assigned a unique identifier called a Net ID, which is a

hexadecimal value ranging from 03 to FE.

To view the list of supported devices, expand the control system in the bottom pane

of System Views and double-click the C2Net-Device slot, or right-click and select

Add Item from the submenu. Supported devices include network control modules,

lighting modules and a variety of Crestron wired touchpanels.

To add a device to the system expand the C2 Net-Device slot and double-click the

desired Net ID, or right click and select Add Item from the submenu. Then select the

device you want to add. Alternatively, you can drag the device from the Cresnet

Modules folder onto the Net ID.

In Program Manager, the C2Net-Device symbol contains no signals; to program a

controlled Cresnet device, expand the C2Net-Device symbol in Program View. Then

drag the device to Detail View.

Slot 19: C-2I-RACK2-LCDPANEL RACK2 Front Panel

The front panel symbol has digital analog and serial inputs and digital button press

outputs to allow the user to program the logic for the built-in LCD panel.

• Button presses: <press1> through <press999>

• For each button press, one corresponding digital feedback signal <fb1>

through <fb999>

• Analog feedback: <an_fb1> through <an_fb256>

• Serials: <text-o1> through <text-o127>

The C2I Front Panel symbol programs the push buttons and LCD display on the

front panel of the RACK2 control system. The symbol detail is similar to that of a

Operation Guide – DOC. 5958 2-Series Card Cage System: RACK2 • 31

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Comentários a estes Manuais

Sem comentários

Crestron CPU2 Especificações Página 35

Comentários a estes Manuais

Manuais e produtos relacionados com Processadores Crestron CPU2