Crestron TPS-RFGWX Especificações descarregar pdf (Página 22)

Two-Way RF Transceiver Crestron TPS-RFGWX

18 • Two-Way RF Transceiver: TPS-RFGWX Operations Guide - DOC. 5847A

TPS-RFGWX Troubleshooting (continued)

TROUBLE

POSSIBLE

CAUSE(S)

CORRECTIVE ACTION

TPS-RFGWX channel ID

does not match the

program.

Enter Viewport and poll the network. Verify

that the channel ID for the TPS-RFGWX is

properly set.

Touchpanel is set to

wrong RF channel or

wrong band.

Refer to the "Setup" section of the guide for

the touchpanel to verify that touchpanel RF

channel is set to match the TPS-RFGWX

channel ID and band.

TPS-RFGWX is in vicinity

of metal.

Verify that large amount of metal is not in

vicinity of transmission.

Touchpanel is too close

to TPS-RFGWX.

Position the touchpanel to within operating

range. Refer to "Specifications" for details.

Touchpanel is not

functioning correctly.

Refer to the "Problem Solving" section of the

guide for the touchpanel.

Network wiring is

incorrect.

Check network cabling for solid connections

and correct pinouts.

TPS-RFGWX is

damaged.

Contact a Crestron customer service

representative.

Multiple

touchpanels only

operate one at a

time.

Multiple touchpanels are

set to same RF channel

RF ID.

Refer to the "Setup" section of the guide for

the touchpanel to verify that its RF channel is

set to match the TPS-RFGWX channel ID.

TPS-RFGWX

does not report

NET ID when

polling through

Viewport. Other

devices are

reported.

Intermittent

response from

TPS-RFGWX

during

communication

with touchpanel.

Rx LED does not

illuminate when

operating

touchpanel or Tx

LED illuminates

when active, but

touchpanel does

not respond.

SIG LED does not

illuminate.

Position the touchpanel to within operating

range or relocate TPS-RFGWX. Refer to

"Specifications" for details.

Touchpanel is out of

range.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Comentários a estes Manuais

Sem comentários