Crestron TPS-RFGWX Especificações descarregar pdf (Página 18)

Two-Way RF Transceiver Crestron TPS-RFGWX

14 • Two-Way RF Transceiver: TPS-RFGWX Operations Guide - DOC. 5847A

1. Open the Crestron Viewport.

Either launch the stand-alone version of Viewport, or start SIMPL

Windows and from the menu bar, select Tools | Viewport.

2. Refer to the figure after this step. From the Viewport menu, select

Setup | Communications settings (alternatively, press Alt+D) to

open the “Port Settings” window.

Setup | Communications Settings Command

3. Select RS-232 as the connection type. Verify that an available COM

port (COM 1 is shown after this step) is selected, Verify that the baud

rate is set to 115200 (PRO 2 default), the parity is None, the data bits

is Eight, the stop bits is One, XON/XOFF is not selected, and

RTS/CTS is selected as shown after this step. Click the OK button to

save the settings and close the window.

“Port Settings” Window

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 27 28

Sem comentários

Crestron TPS-RFGWX Especificações Página 18