Crestron C2N-SDC Guia de Instalação descarregar pdf (Página 5)

Crestron C2N-SDC-DC Shade & Drape DC Motor Controller

Shade & Drape DC Motor Controller:

C2N-SDC-DC

Introduction

Features & Functions

The Crestron



C2N-SDC-DC is a shade and drape DC motor control

Cresnet

slave module designed to control two 2-wire bi-directional DC

motors that drive shades and drapes. The C2N-SDC-DC is specifically

designed for the Cresnet control network and functions as part of a

complete Crestron control/automation system. Power for the shade

motors is derived from the Cresnet +24 VDC supply. Two 2-pin terminal

connectors are provided for + drive and – drive for each motor.

Functional Summary

• Controls two 24 VDC shade or drape motors individually or

simultaneously (30 W maximum)

• The C2N-SDC-DC mounts on a standard 2-gang or

4-inch square electrical box

• Four manual pushbutton controls are provided on the faceplate

The C2N-SDC-DC is designed to fit inside and mount to a 2-gang wall

box or 4 x 4 x 1.5 inch electrical box, where input power for the two

shade or drape motors is derived from Cresnet.

Two 2-pin terminal blocks for motor connections can accommodate

30 AWG to 12 AWG wires.

A hardware interlock prevents the motors from being driven in both

directions simultaneously. In addition, the firmware implements a

Operations & Installation Guide - DOC. 6373 Shade & Drape DC Motor Controller: C2N-SDC-DC y

1 2 3 4 5 6 7 8 9 10 ... 35 36

Sem comentários

Crestron C2N-SDC Guia de Instalação Página 5