Crestron TPS-MEM64MB Guia de Instalação descarregar pdf (Página 13)

Crestron TPS-MEM64MB & TPS-MEM128MB Flash Memory

11. Move the jumper to the 3.3V position by placing the jumper

over the center pin and the pin labeled 3.3V as shown in the

following diagram.

Jumper in 3.3V Position

NOTE: The memory expansion module will not work if the jumper is in

the “+5V” position.

12. As shown in the following diagram, locate the memory

socket.

Memory Socket Location

LOCATION

OF MEMORY

SOCKET WITH

MEMORY

MODULE

NOTE

POLARITY

OF MEMORY

MODULE

(NOTCH IN

CORNER OF

BOARD)

SIDE CLIP (ONE

AT EACH END)

13. Press the two metallic side clips of the socket securing the

original module in opposing directions and notice that the

module lifts up slightly.

14. Use even pressure while backing out the original module out

of the socket.

Installation Guide - DOC. 6261 Flash Memory for TPS User Interfaces: TPS-MEM64MB & TPS-MEM128MB • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

Crestron TPS-MEM64MB Guia de Instalação Página 13