Crestron GLS-EM-MCU Especificações descarregar pdf (Página 14)

Crestron Green Light

Power Meter Control Unit Crestron GLS-EM-MCU

•

Crestron Green Light

Power Meter Control Unit: GLS-EM-MCU Operations Guide – DOC. 7294B

Setup

Identity Code

The IP ID is set within the GLS-EM-MCU’s IP table using Crestron Toolbox™. For

information on setting an IP table, refer to the Crestron Toolbox help file. The IP IDs

of multiple GLS-EM-MCU devices in the same system must be unique.

When setting the IP ID, consider the following:

• The IP ID of each unit must match an IP ID specified in the SIMPL

Windows program.

• Each device using IP to communicate with a control system must have a

unique IP ID.

Installation and Wiring

For details on installation and wiring, refer to the latest version of the

GLS-EM-MCU Installation Guide (Doc. 7295), which is available from the Crestron

Web site (www.crestron.com/manuals

Hardware Hookup

Make the necessary connections as called out in the illustration that follows this

paragraph. Apply power after all connections have been made.

When making connections to the GLS-EM-MCU, note that the included cable cannot

be extended.

Hardware Connections for the GLS-EM-MCU

NEUT & LINE 1 - 3:

Neutral and Line

Connections from

Main Power Supply

CT1 - 3:

Input for Main Leg

Current Transformers

BRANCH CIRCUIT

MONITORS:

From GLS-EM-CTI Current

Transformer Interface

(Supplied Separately)

PULSE INPUTS:

From Programmable

Digital Inputs

USB:

To PC for Initial Setup

and Programming

LAN:

10BASE-T/

100BASE-TX

Ethernet to LAN

NOTE: To prevent overheating, do not operate this product in an area that exceeds

the environmental temperature range listed in the table of specifications.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 23 24

Comentários a estes Manuais

Sem comentários

Crestron GLS-EM-MCU Especificações Página 14

Comentários a estes Manuais

Manuais e produtos relacionados com não Crestron GLS-EM-MCU