Crestron CT-1000 Especificações descarregar pdf (Página 40)

Touchpanels Crestron CT-1000 & LC-1000

36 • Series 1000 Wall-Mounted Touchpanels Operations Guide – DOC. 5813B

7. Position the mounting bracket/touchpanel assembly (less the plastic

buttons and faceplate) over the opening and apply equal pressure on the

four screw heads of the touchpanel until the assembly slides into place

(refer to illustration after the last step).

CAUTION: Do not apply excessive pressure to the touchscreen display during

installation. Doing so can crack the screen and damage the touchpanel.

8. Tighten four screws until mounting bracket/touchpanel assembly is

secure within the opening.

9. Install the plastic buttons by firmly pressing them into place (refer to

illustration after the last step). If buttons are engraved, be sure to match

button engraving with button functionality.

10. Firmly press on the plastic faceplate over the touchpanel (refer to

illustration after this step).

NOTE: If necessary, refer to “Touchpanel Removal" on page 13 for removal

procedure.

Secure Mounting Bracket/Touchpanel Assembly and Add Plastic Buttons and Faceplate

1 2 ... 35 36 37 38 39 40 41 42 43 44

Sem comentários

Crestron CT-1000 Especificações Página 40