Crestron BB-1000L Manual do Utilizador descarregar pdf (Página 9)

Crestron MMK-1000L & WMKM-1000L Mud Mount Kits

Controller Mounting Using MMK-1000L – Exploded View

PUSH-ON FASTENERS (4)

(2004121)

ADJUSTMENT PLATES (2)

(2004808)

PMK-1000L

DRYWALL

MUD RING

(2004810)

APAD MOUNTING SCREWS

(4) #04-40 X 2"

(2018793)

DRYWALL SCREWS

(NOT INCLUDED)

APAD

WMKM-1000L Procedure

This section provides the necessary steps for the assembly and installation of the

WMKM-1000L into a wall. Review the procedure and complete the steps in the

order provided. The only tools or materials required and not supplied are a drywall

saw or equivalent, a level, four standard drywall screws, #2 Phillips screwdriver and

tools/material to apply drywall joint compound.

CAUTION: Allow an air gap of at least 12 inches (30.48 cm) in the wall cavity

above and below the controller for heat dissipation.

1. Insert the two pins on one adjustment plate into the top two outer holes on

the mounting plate, as shown in the illustration on the following page.

Installation Guide – DOC. 6062A Mud Mount Kits: MMK-1000L & WMKM-1000L • 7

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Crestron BB-1000L Manual do Utilizador Página 9