Crestron FT-PWR Guia de Instalação descarregar pdf (Página 15)

Crestron FT-PWR-D & FT-PWR-D-LG FlipTop Power Centers

Cable Support Plate Installation

When selecting cables for installation in the FT-PWR-D/-LG, cable connector length

and strain relief diameter are important considerations.

• If the connector is too long, it can interfere with cover operation.

• If the width of the cable strain relief is too similar to the bushing inside

diameter, the bushing can trap the cable.

NOTE: Do not use the cable support plate without the bushings.

Example Cable End

Must be wider than the inside

diameter of the bushing.

Large Bushing: 0.54 in (14 mm)

Medium Bushing: 0.39 in (10 mm)

Small Bushing: 0.31 in (8 mm)

Must not be longer than

2.13 in (54 mm) to avoid

interference with cover

operation.

Operations & Installation Guide – DOC. 6640C FlipTop Power Centers: FT-PWR-D & FT-PWR-D-LG • 11

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Sem comentários

Crestron FT-PWR Guia de Instalação Página 15