Crestron TPMC-9L Guia de Instalação descarregar pdf (Página 29)

Crestron TPMC-9L 9” Wall Mount Touch Screen

Display

From the main Setup menu, touch Display to enter the Display Settings screen,

shown in the illustration below.

Display Settings Screen

The Display Settings screen contains buttons for turning the TPMC-9L’s Auto

Brightness Control on or off, controls for pre-setting the Screen Brightness Level

– HIGH and Screen Brightness Level – LOW, as well as HIGH and LOW buttons

for instantly activating these presets. In addition, there are controls to set the Sensor

Threshold and a Current Light Sensor Level meter, like the one on the main

Diagnostics menu (refer to “Diagnostics” which starts on page 21), to indicate

ambient light level.

With the Auto Brightness Control set to OFF, the screen brightness is at the level

set by the Screen Brightness controls (which appear in place of the Sensor

Threshold and Current Light Sensor Level meters, as shown in the illustration that

follows).

Screen Brightness Controls

Use the Screen Brightness controls to adjust the relative level (0% to 100%) of

current brightness. Use the Screen Brightness Level – HIGH and Screen

Brightness Level – LOW controls to set the high and low preset brightness levels.

Press the HIGH and LOW buttons to check each level.

With the Auto Brightness Control set to ON (the default), the Current Light

Sensor Level meter changes to show the amount of ambient light reaching the

sensor. The internal light sensor adjusts the brightness level to accommodate for the

current room ambience. If the light level is above the threshold, the brightness

changes to the high setting; if the level is below the threshold, brightness changes to

the low setting.

Operations & Installation Guide – DOC. 7030F 9” Wall Mount Touch Screen: TPMC-9L • 25

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 43 44

Sem comentários

Crestron TPMC-9L Guia de Instalação Página 29