Crestron TPMC-4SM Guia de Instalação descarregar pdf (Página 13)

Crestron TPMC-4SM Isys i/O

Wall Mount Touchpanel Media Center

Connectors, Controls & Indicators

# CONNECTORS,

CONTROLS &

INDICATORS

DESCRIPTION

HARD KEYS

with

FEEDBACK/

BACKLIGHT

(10) Optional programmable pushbuttons,

translucent backlit with (1) red and (1) green

LED per hard key.

2 RESET

(1) Recessed pushbutton behind pinhole for

hardware reset

LAN PoE

2, 3

GREEN

LED

YELLOW

LED

PIN 1

PIN 8

(1) 8-wire RJ-45 with two LED indicators;

10BASE-T/100BASE-TX Ethernet port,

802.3af Power over Ethernet compliant;

Green LED indicates link status;

Yellow LED indicates Ethernet activity

PIN SIGNAL PIN SIGNAL

1 TX + 5 N/C

2 TX - 6 RX -

3 RX + 7 N/C

4 N/C 8 N/C

OCCUPANCY

SENSOR INPUT

(4) Captive screw terminals comprising (2)

voltage sensing inputs (referenced to

ground) with 24 Volt DC power output;

Input voltage range: 0-30 Volts DC;

Sensing threshold: ≥ 4.5 Volts DC active,

≤ 1 Volt DC inactive;

Maximum DC load: 4 Watts @ 24 Volts DC,

provides operating power for up to (4)

Crestron GLS Series occupancy sensors

1. Refer to “Pushbutton Programming” on page 31 for details.

2. To determine which is pin 1 on the cable, hold the cable so the end of the eight pin modular plug is

facing away from you, with the clip down and copper side up. Pin 1 is on the far left.

3. The pin out table indicates signal connections. DC power applied by Ethernet power sourcing

equipment (PSE) can connect to either signal pins or N/C pins.

Operations & Installation Guide – DOC. 6845A Isys i/O

Wall Mount Touchpanel Media Center: TPMC-4SM • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 43 44

Comentários a estes Manuais

Sem comentários

Crestron TPMC-4SM Guia de Instalação Página 13

Comentários a estes Manuais

Manuais e produtos relacionados com Monitor tátil Crestron TPMC-4SM