Crestron QuickMedia QM-RX Especificações descarregar pdf (Página 10)

QuickMedia Receiver/Processor Crestron QM-RMCRX

QM-RMCRX Specifications (continued)

SPECIFICATION DETAILS

Amplifier Output

Amplified Audio 10 W maximum per channel into 4 or 8 Ω

Frequency Response 20 Hz to 20 kHz, +/- 0.5 dB

Signal-to-Noise Ratio 20 Hz to 20 kHz A-weighted 90 dB

Total Harmonic Distortion 20 Hz to 20 kHz 0.7%

Audio Switcher Processing

Volume Control -80 dB to +20dB unbalanced input and output

Bass/Treble Controls

±15 dB

Selectable Equalization 3-band graphic plus 9-band parametric EQ

5-band graphic plus 7-band parametric EQ

5-band graphic plus 7-band parametric with speech

optimization EQ

10-band graphic plus 2-band parametric

Full 12-band parametric, no graphic equalizers

Power Requirements 36 Watts (1.5 Amp @ 24 VDC)

60 Watt external power pack (PW-2420) supplied

Initial Firmware Release 3.101

Environmental Temperature 41° to 104°F (5° to 40°C)

Environmental Humidity 10% to 90% RH (non-condensing)

Dimensions & Weight Height: 2.45 in (6.22 cm)

Width: 7.53 in (19.13 cm)

Depth: 5.24 in (13.30 cm)

Weight: 2.20 lb (1.00 kg)

Physical Description

The QM-RMCRX is housed in a black enclosure with labeling on the front and

rear panels. There are four rubber feet on the base of the unit for stability and to

prevent slippage. Refer to the following illustrations and physical views.

Front and Rear Views

6 • QuickMedia Receiver/Processor: QM-RMCRX Operations Guide - DOC. 6236

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 59 60

Sem comentários

Crestron QuickMedia QM-RX Especificações Página 10