Crestron DM-RX1-1G Guia de Instalação descarregar pdf (Página 16)

DigitalMedia™ CAT Receiver Crestron DM-RX1-1G

2. Refer to the following table for the D and M terminal block pinouts.

D and M Terminal Block(s)

1 2 3 4 5 6

7 8

PIN # WIRE COLOR PIN # WIRE COLOR

1 Brown 5 Green

2 White/Brown 6 White/Green

3 Orange 7 Blue

4 White/Orange 8 White/Blue

3. For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable. Up to two DM

Repeaters, model DM-DR (sold separately) may be required. Refer to the latest

version of the Crestron DigitalMedia Design Guide (Doc. 4789) for complete

wiring guidelines.

4. Refer to the following table for the G B A 24 connector pinouts.

G B A 24 Terminal Block

PIN # SIGNAL DESCRIPTION WIRE COLOR

G Ground DC Ground Black and Ground

B DMNet- DMNet Gray

A DMNet+ DMNet Orange

24 24V DC DC Power Red

5. DMNet wiring is not compatible with Cresnet wiring. DMNet wiring cannot be

daisy chained.

6. A grounding lead is provided for connection to earth ground (building steel). This

ground connection is recommended to provide a common ground reference for

signals provided to the DM-RX1-1G, and to reduce the incidence of possible

damage to the unit from static discharge.

12 • DM

CAT Receiver: DM-RX1-1G Operations & Installation Guide – DOC. 6969B

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 35 36

Sem comentários

Crestron DM-RX1-1G Guia de Instalação Página 16