Crestron C2N-DAP8 Especificações descarregar pdf (Página 48)

Digital Audio Processor Crestron C2N-DAP8

44 • Digital Audio Processor: C2N-DAP8 Operations Guide - DOC. 8186

Slot 07: Audio Output B Controls

The Audio Output B Controls module is a volume/tone controller built into slot 07 of

the C2N-DAP8 surround sound processor. The C2N-DAP8 provides three outputs

for analog audio: one CAT5 output and two left/right RCA outputs labeled A and B.

Output A flows directly from the processor's internal Analog Audio Switch without

additional processing, while output B is passed through the Audio Output B Controls

volume/tone controller. The symbol is shown below.

Audio Output B Controls

Digitals

The <Mute-On> and <Mute_Relay_On> inputs cuts audio for as long as their

respective signal remains high. The <Loudness-On> input activates the loudness

function for as long as the input remains high, while the <Mono-On> input switches

the audio setting from stereo to mono.

Analogs

The <Volume> analog input sets the volume level from 0% to 100%, which

corresponds to a gain range of –80 to +20dB. The other analog inputs control bass,

treble and balance settings relative to the 50% mark. That is, a <Balance> input with

a value of 50% results in even distribution of audio between the left and right

speakers (0% = full left; 100% = full right). Likewise, 50% indicates a neutral level

for <Treble> and <Bass>.

NOTE: The symbols for the surround sound processor’s Surround Sound Decoder

symbol, Slot 08; the Speaker Settings symbol, Slot 09 Sub-Slot 1; the Full

Parametric EQ Controls symbol, Slot 09 Sub-Slot 2; and the Graphic EQ Controls

symbol, Slot 09 Sub-Slot 3, are very complex. Crestron strongly recommends using

its Digital Audio Tools (DAT) software to configure these modules. However, they

are described in “Appendix: Advanced Programming Symbols” beginning on page

52, for those advanced programmers who wish to program them in SIMPL

Windows.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 71 72

Sem comentários

Crestron C2N-DAP8 Especificações Página 48