Crestron UPX-2 Especificações descarregar pdf (Página 86)

Crestron UPX-2 Universal Presentation Processor

The Functions menu may now be used to upload a project, update

firmware, and reset the network ID.

Crestron Toolbox Functions Menu

TCP/IP Communication

This section explains how to configure a UPX-2 to communicate over Ethernet using

TCP/IP. These procedures assume that the UPX-2 has been powered up and

connected as shown on page 60.

1. To establish TCP/IP communications with the UPX-2, a serial connection

must be established between the PC and UPX-2. Refer to “Serial

Communication Setup” on page 60 for instructions.

2. While connected to the UPX-2, select Functions | Ethernet Addressing.

The current IP address, IP mask and default router are displayed.

“Ethernet Address” Window

3. Enter a new IP address, IP Mask, Default Router, or select Enable DHCP

and click OK.

64 ¥ Universal Presentation Processor: UPX-2 Operations Guide – DOC. 6276B

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 113 114

Sem comentários

Crestron UPX-2 Especificações Página 86