Crestron TPMC-17-CH Manual do Utilizador descarregar pdf (Página 2)

Crestron Isys i/O

™

TPMC-17-CH 17" Touchpanel Media Center

Ethernet

10BaseT/100BaseTX, auto-negotiating, full/half duplex TCP/IP, UDP/IP, DHCP, SSL,

IEEE 802.3U compliant

Wireless

Wireless Ethernet capable using third-party 802.11 PC card*

Video

Scalers: (2) one per input, each feeding one onscreen video window or full screen image;

line doubling of video sources and scaling of RGB sources, automatic detection of input

format, motion adaptive de-interlacing, and reverse 3:2/2:2 pulldown

Digital Sampling: 24 bits per pixel, 8 bits per color

Resolution: 24-bit video/graphics

Output Color Depth: 24 bits per pixel, 8 bits per color

Streaming/File Formats: ASF, ASX, AVI, MPEG, WMV, WMX, WVX (via WMP)

Audio

Hardware Features: Built-in microphone and biamplified speakers, stereo headphone

output, internal volume control and audio mixer

Streaming/File Formats: MP3, WAV, WAX, WMA (via WMP)

Audio Feedback (WAV): 8 & 16 bit PCM, mono & stereo, 8 – 44 kHz sampling rates

Amplification: Biamplified, mono, 5 Watts for high-frequency, 5 Watts for low-frequency

Buttons

: (4) Backlit “softkey” buttons, programmable

: (1) Backlit hard reset button, reboots the touchpanel system

Connectors

CH VIDEO IN 1 – 2: (2) 8-wire RJ45 female, CAT5 balanced video input ports, each

dynamically configurable under system control as:

(1) Composite (NTSC/PAL), or

(1) S-Video (Y/C), or

(1) Component (YP

)

Formats: SDTV 480i (NTSC) & 576i (PAL), EDTV 480p & 576p, HDTV 720p & 1080i;

Input Impedance: 100 ohms balanced

Connect to any Crestron CAT5 balanced video source(s), or TPMC-CH-IMC interface

module (included) via 15 foot "triamese" cable provided;

Maximum CAT5 Distance: 500 feet for component/HDTV, 750 feet for composite/S-Video

CH AUDIO I/O: (1) 8-wire RJ45 female, bidirectional CAT5 balanced audio port:

Receives (1) balanced stereo audio signal, and

Transmits (1) balanced stereo audio signal from internal microphone

Maximum Input Level: 4 V

RMS

Maximum Output Level: 2 V

RMS

Input/Output Impedance: 600 ohms

Connects to any other Crestron CAT5 balanced audio port, or TPMC-CH-IMC interface

module (included) via 15 foot "triamese" cable provided;

Maximum CAT5 Distance: 1000 feet

HEADPHONES: (1) 3.5 mm TRS mini phone jack

Output Power: 105 mW per channel

Minimum Impedance: 8 ohms

USB: (2) USB Type A female, USB 1.1 ports for mouse, keyboard, and storage devices*

RS-232: (1) 6-pin RJ11 female, computer console port

Bidirectional RS-232 up to 115.2k baud

Hardware and software handshaking support

PC CARD A – B: (2) Type II PCMCIA Card slots for memory expansion, project upload,

and wireless NIC*

ETHERNET: (1) 8-wire RJ45 with 2 LED indicators, 10BaseT/100BaseTX Ethernet port

Green LED indicates network speed, Yellow LED indicates Ethernet activity

NET: (1) 4-pin 5mm detachable terminal block

Cresnet Slave Port (data only; 24V terminal not used)

Connects to Cresnet control network, or TPMC-CH-IMC interface module (included) via

15 foot "triamese" cable provided

PWR: (1) 4-pin DIN female, DC power input (External power supply included)

GND: (1) 6-32 screw, chassis ground lug

Power Requirements

8.4 Amp @ 12 Volts DC – External power supply included

Cresnet Power Usage: 0 Watt @ 24 Volts DC

Environmental

Temperature: 50° to 113°F (10° to 45°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Construction: High impact black/silver injection-molded case with integral rear cover and

cable strain relief

Screen Tilt: Adjustable 45 to 90 degrees

Dimensions

Height: 14.17 in (35.99 cm)

Width: 17.63 in (44.77 cm)

Depth: 13.74 in (34.90 cm)

Weight

19.4 lbs (8.8 kg)

SPECIFICATIONS for TPMC-CH-IMC Interface Module (Included with TPMC-17-CH):

Connectors

NET: (1) 4-pin 3.5mm detachable terminal block, Cresnet slave port

Connects to Cresnet control network

VIDEO COMP/Y/Y, C/P

, P

: (3) BNC female

Provides (1) Composite, S-Video, or component video input

Input Impedance: 75 ohms

Input Level: 1 V

P-P

nominal, 1.5 V

P-P

maximum

Maximum DC Offset: 1.5 Volts

AUDIO IN: (1) 5-pin 3.5mm detachable terminal block

Balanced/unbalanced stereo line-level input

Input Impedance: 20k ohms balanced, 10k ohms unbalanced

Maximum Input Level: 4 V

RMS

balanced, 2 V

RMS

unbalanced

AUDIO OUT: (1) 5-pin 3.5mm detachable terminal block

Balanced stereo line-level output (unbuffered pass-thru from AUDIO TO PANEL)

AUDIO TO PANEL: (1) 8-pin RJ45 female, bidirectional CAT5 balanced stereo audio port

Output Impedance: 100 ohms balanced

Maximum Output Level: 2 V

RMS

Input Impedance: Infinite (unbuffered pass-thru to AUDIO OUT)

VIDEO TO PANEL: (1) 8-pin RJ45 female, CAT5 balanced video output port

Output Impedance: 100 ohms balanced

NET TO PANEL: (1) 4-pin 3.5mm detachable terminal block, pass-thru from NET port

LED Indicators

PWR: (green) Indicates 24 Volts DC power supplied from Cresnet control network

Power Requirements

Cresnet Power Usage: 2 Watt (0.08 Amps @ 24 Volts DC)

Environmental

Temperature: 41° to 122°F (5° to 50°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Black metal, surface mount box with (2) integral mounting flanges

Dimensions

Height: 1.29 in (3.28 cm)

Width: 7.30 in (18.54 cm)

Depth: 3.95 in (10.03 cm)

Weight

9.7 oz (0.28 kg)

See manual or contact Crestron for a current list of compatible devices and embedded

applications. To ensure reliable performance, new device drivers and applications are

available only from Crestron through firmware updates.

Crestron Electronics, Inc.

15 Volvo Drive

Rockleigh, NJ 07647

Tel: 800.237.2041 / 201.767.3400

Fax: 201.767.1905

www.crestron.com

Specifications subject to change without notice. Doc.6192 04/05

All brand names, product names and trademarks are the property of their respective owners.

1 2 3 4

Crestron Isys i/O 1
TPMC-17-CH 1

Comentários a estes Manuais

Sem comentários

Crestron TPMC-17-CH Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Barebones PC/estação de trabalho Crestron TPMC-17-CH