Crestron C2N-DBN12 Guia de Instalação descarregar pdf (Página 10)

Decorator Wall Panels Crestron C2N-DBN12 & C2N-DBF12

6 • Decorator Wall Panels: C2N-DBN12 & C2N-DBF12 Operations & Installation Guide - DOC. 6200

Installation View

Button Replacement

Replacing/changing the removable buttons in a wall panel is a simple

process. Refer to the illustrations above and the following procedures.

1. If the wall panel is installed in an electrical box, remove the two

1-inch securing screws, carefully pull the wall panel from the

electrical box, and disconnect the Cresnet cable.

2. Remove the four screws that attach the divider, and remove the

divider.

CAUTION: The removable buttons fit snugly on the rubber membrane

and must be removed carefully to avoid pulling the membrane from the

unit. Once the membrane is detached, you may be unable to reattach it.

3. While holding adjacent buttons in place, carefully pull the

button(s) to be replaced from the rubber membrane.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Sem comentários

Crestron C2N-DBN12 Guia de Instalação Página 10