Crestron C2N-DB12 Guia de Instalação descarregar pdf (Página 19)

Crestron C2N-DB6, C2N-DB8 & C2N-DB12 Decorator Keypads

Problem Solving

Troubleshooting

The following table provides corrective action for possible trouble

situations. If further assistance is required, please contact a Crestron

customer service representative.

C2N-DB6/8/12 Keypad Troubleshooting

TROUBLE POSSIBLE

CAUSE(S)

CORRECTIVE

ACTION

The keypad does

not function.

The wrong power

supply is in use.

Use a Crestron power

supply.

The unit is not

receiving power, or

is receiving

insufficient power.

Verify that the cable

plugged into the NET

port is secure. Verify

that the power supply

is correct.

There is a loose

connection in the

network.

Verify that the cable

plugged into the NET

port is secure.

The keypad does

not function. All

feedback LEDs

are on low.

An improper Net ID

is used.

Verify that the

device’s Net ID

matches the Net ID in

the software program.

The keypad does

not function, or

does not function

as expected.

However, it

reports on

Cresnet at the

proper Net ID.

The unit is not

programmed

correctly.

Use SIMPL Debugger

to check the behavior

when buttons are

pressed. Revise and

reload the program as

needed to correct the

behavior.

The keypad is

mounted upside

down.

Check keypad

orientation.

(Continued on following page)

Operations & Installation Guide - DOC. 6154C Decorator Keypads: C2N-DB6/8/12 • 15

1 2 ... 14 15 16 17 18 19 20 21 22 23 24

Comentários a estes Manuais

Sem comentários

Crestron C2N-DB12 Guia de Instalação Página 19

Comentários a estes Manuais

Manuais e produtos relacionados com Teclados numéricos Crestron C2N-DB12