Crestron ST-VS Especificações descarregar pdf (Página 8)

Video Sensor Module Crestron ST-VS

Ports

A number of ports are provided on the back of the ST-VS. Each has a silk-screened

label. Refer to the illustration and descriptions below.

ST-VS Ports

CRESTRON ELECTRONICS INC. ROCKLEIGH, N.J. 07647

12 VDC .5A

NOTE: If the ST-VS is part of the Cresnet system, use of this port is optional.

This DC power socket connector is used to supply power via an external AC power

pack. Crestron recommends and supplies specific power packs for its network

devices. Available power packs include Crestron part number PW-1205 (120 VAC

USA and Canada) or PWI-1210 (230 VAC International).

AC Power Pack Specifications

CRESTRON POWER PACK INPUT OUTPUT

PW-1205 120 VAC 60 Hz 12 VDC 500 mA

PWI-1210 230 VAC 50 Hz 12 VDC 1000 mA

AC Power Pack Polarity

NET

These two 6-pin, RJ-12 modular jacks are used to connect the ST-VS module to a

Cresnet control system. When the module is part of the Cresnet system, power may

be supplied via NET if within system power and cable length limits; the supplied

power pack is optional and need not be attached. Two NET ports are available so

that network units can be daisy-chained together. Review the latest revision of the

Network Modular Cable Requirements (Doc. 5682).

Net Connectors

PIN SIGNAL

1 +24

2 +24

3 Y

4 Z

5 GND

1 2 3 4 5 6

6 GND

4 • Video Sensor Module: ST-VS Operations Guide – DOC. 5767A

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 23 24

Sem comentários

Crestron ST-VS Especificações Página 8