Crestron TPS-IMC Manual do Utilizador descarregar pdf (Página 5)

Crestron TPS-IMC Interface Module

Operations Guide - DOC. 5856 Interface Module: TPS-IMC •• 3

• NET/VIDEO – This 10-position RJ45 mates with the TPS-5000 or TPS-6000

touchpanel and has a dual purpose. Refer to the descriptions and pinout table that

follow this paragraph. The 10-position net/video cable assembly is supplied.

Even though it may fit, do not use the 8-position audio cable.

1. This port provides network connection to the touchpanel.

2. This port also makes available composite and S-video input for TV video card

(with the purchase and installation of the TPS-VID). Consult the latest revision

of the TPS-VID Operations & Installation Guide (Doc. 5869) for details.

NET/VIDEO Pinouts

PIN # DESIGNATION DESCRIPTION

+24V Power (Network)

GND Ground (Network)

C+ Chrominance (Positive)

C- Chrominance (Negative)

Y Data (Network)

Z Data (Network)

Y+ Luminance (Positive)/Composite

Y- Luminance (Negative)/Composite

GND Ground (Network)

+24V Power (Network)

• MIC OUT – The port mates with a three-pin connector, supplied, and produces

line level differential output. Description of the pinouts is shown in the table after

this paragraph.

MICROPHONE Pinouts

PIN DESCRIPTION

M+ Positive

M- Negative

S Shield

• AUDIO INPUT – The port mates with a six-pin connector, supplied, and

provides differential/single ended audio input and output. Description of the

pinouts is shown in the table after this paragraph.

AUDIO INPUT Pinouts

PIN DESCRIPTION

S Shield

R+ Right Positive

R- Right Negative

L+ Left Positive

L- Left Negative

S Shield

1 2 3 4 5 6 7 8 9 10 11 12

Sem comentários

Crestron TPS-IMC Manual do Utilizador Página 5