Crestron QM-MD16X16 Especificações descarregar pdf (Página 27)

Crestron QM-MD16X16 16X16 QuickMedia™ Matrix Switcher

To disable routing to a specific output, press the corresponding output

button again. The LED will turn off.

If a button press will result in changing the current routing, the ENTER

LED will flash rapidly.

5. Press ENTER to make the connection(s) shown on the front panel. The

ENTER LED will turn off.

Changes made on the front panel are made only after the ENTER button is

pressed. If you do not press ENTER, the connection is not made.

NOTE: If ENTER has not been pressed, you can go back and “undo”

changes made to the current routing.

Switching Audio & Video

Separately

1. Press LOCAL to place the QM-MD16X16 in the Local mode (the LOCAL

LED is flashing slowly).

2. Press AUDIO BREAK to turn on the audio break function. The AUDIO

BREAK and A LEDs will turn on.

3. Press the button corresponding to the audio portion of the input to be

switched. The LED of the selected input will light.

4. Press the button(s) corresponding to the output(s) to be switched. The

LED(s) of the selected output(s) will light.

To disable audio routing to a specific output, press the corresponding output

button again. The LED will turn off.

If a button press will result in changing the current routing, the ENTER

LED will flash rapidly.

5. Press ENTER to make the audio connection(s) shown on the front panel.

The ENTER LED will turn off.

Changes made on the front panel are made only after the ENTER button is

pressed. If you do not press ENTER, the connection is not made.

NOTE: If ENTER has not been pressed, you can go back and “undo”

changes made to the current routing.

6. Press V to switch the video portion of a signal. The A LED will turn off and

the V LED will turn on.

7. Press the button corresponding to the video portion of the input to be

switched. The LED of the selected input will light.

8. Press the button(s) corresponding to the output(s) to be switched. The

LED(s) of the selected output(s) will light.

To disable video routing to a specific output, press the corresponding output

button again. The LED will turn off.

If a button press will result in changing the current routing, the ENTER

LED will flash rapidly.

9. Press ENTER to make the video connection(s) shown on the front panel.

The ENTER LED will turn off.

Changes made on the front panel are made only after the ENTER button is

pressed. If you do not press ENTER, the connection is not made.

NOTE: If ENTER has not been pressed, you can go back and “undo” and

changes made to the current routing.

Operations Guide – DOC. 6538A 16X16 QuickMedia™ Matrix Switcher: QM-MD16X16 • 23

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Comentários a estes Manuais

Sem comentários

Crestron QM-MD16X16 Especificações Página 27

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Crestron QM-MD16X16