Crestron PRO2 Manual do Utilizador descarregar pdf (Página 4)

SYMETRIX SOLUTIONS: TECH TIP

February 2014

6408 216th Street SW | Mountlake Terrace, WA 98043 USA

T +1.425.778.7728 F +1.425.778.7727 | www.symetrix.co

Once completed the conﬁgure screen should look similar to the following ﬁgure.

Figure 4. The Crestron control system configure screen.

Next, set the IP address of the Radius AEC that Crestron will be controlling

by double clicking on the UPD/IP communication block and selecting

IP Net Address. In this example, the Radius AEC has the IP address of

192.168.100.105.

Figure 5. Configuring the IP address for the Symetrix device to be controlled.

When using a control system to control the Radius AEC, it is recommended

that the Radius AEC have a static IP address to ensure the control system can

always communicate with the device regardless of DHCP server status.

In this example there is also a Crestron Mobile device that is the control module

for the Apple iPad controller conﬁgured using Crestron’s Vision Tools Pro-e

software. Other touch panel devices could also be used. Using an Apple iPad

with Vision Tools Pro-e requires installing on the target iPad the Crestron iPad

application (currently $99) from the Apple ITunes store. Although the price

seems high for this application, it makes the iPad an inexpensive touch screen

for the Crestron processor.

In the Program mode of Simpl (pressing the Program button on the menu), the

Simpl ﬁle will look like the ﬁgure below.

Figure 6. The Crestron control example code.

1 2 3 4 5 6 7 8 9 10 11

Sem comentários

Crestron PRO2 Manual do Utilizador Página 4