Crestron TPS-XDS Guia de Instalação descarregar pdf (Página 7)

Crestron TPS-XBTP Battery Pack for TPS-XTXRF

Leading Specifications

The following table provides a summary of leading specifications for the

TPS-XBTP.

Leading Specifications for the TPS-XBTP

SPECIFICATION DETAILS

Output Voltage

20 VDC (4.5 Ah), nominal

Composition Nickel-metal hydride (Ni-MH)

Estimated Operating Time, Approximately 2-hours with typical use,

(new unit with full charge) (8 -10 hours in touchpanel stand-by) *

Estimated Life 500 charging/discharging cycles

Optimal Operating Temperature

Approximately 32

F to 104

F (0

C to +40

Optimal Storage Temperature Approximately -4

F to 113

F (-20

C to +45

Charging Temperature

Approximately 50

F to 95

F (10

C to 35

Weight 2.20 lb (1.00 kg)

* Approximate battery life and charge times for Battery pack in touchpanels:

Worst case battery life - TPS-6000 with all 3 cards installed is 2 hours at full backlight

Best case battery life - TPS-4500 with no cards installed is 3.5 hours at full backlight

Worst case charge time - TPS-6000 with all 3 cards installed is 12 hours

Best case charge time - All units with power off is 3.5 hours

NOTE: The battery will not charge when hot. To cool the battery, either

turn off power to the Touchpanel by pressing the power down button on

the touchscreen (or use the power down timeout), or remove the battery

from the touchpanel. The battery can also be mounted on the stand-alone

charger to cool and then charge. The charger begins charging the battery

once the battery has cooled.

As of the date of manufacture, the TPS-XBTP has been tested and found

to comply with specifications for CE marking and standards per EMC

and Radiocommunications Compliance Labelling.

Operations and Installation Guide - DOC. 5845 Battery Pack for TPS-XTXRF: TPS-XBTP • 3

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Sem comentários

Crestron TPS-XDS Guia de Instalação Página 7