Crestron DV-320-K Manual do Utilizador Página 32

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 80
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 31
CO
2
/VOC
EnOcean
Occupancy sensor
Air quality
Lighting
Temperature
Cooling ceiling
Shading
Window contact
Heating
Ventilation
Dew point sensor
EnOcean
The “Function Selection” function regulates the controller for heating
and cooling and compares the current room temperature against the
set value. If the current value is lower than the target value for the
energy level “Comfort” heating, the heating controller is activated.
If the current room temperature is higher than the set value for the
energy level “Comfort” cooling, the cooling controller is activated.
Simultaneous heating and cooling is not possible.
Ventilation
In summer, natural cooling at night helps reduce energy
consumption: The night cooling program switches on the room
ventilation system and ventilates the offi ces using cool external air.
This removes heat from the building at night so that less energy is
required to cool the room the following day. For electrically operated
windows, these can also be used for automatic night cooling in
summer.
Load optimisation
Communication between systems for automation of energy
centres and systems for the generation and distribution of heating
and cooling water enables needs-based adjustment of the fl ow
temperatures. This allows transfer losses to be minimised and the
overall effectiveness of the systems to be increased.
CO
2
/VOC
Air quality regulation
Depending on the measured air quality, the volume fl ow
controller is used to introduce more or less fresh air into the room.
If the air quality is good, air intake is reduced to a minimum volume
ow. The central air conditioning unit for ventilation automatically
adjusts the level of ventilation based on the data communicated
between the room automation system and the primary systems. This
reduces the energy consumption of the fans by up to 45 %. In the
event of zero occupancy, the volume fl ow is reduced to a minimum.
Basic principles and standards of building automation | Use in room automation
New Automation Technology
BECKHOFF
We reserve the right to make technical changes.
32
Vista de página 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 79 80

Comentários a estes Manuais

Sem comentários