Crestron C2N-IADS30X24 Especificações descarregar pdf (Página 13)

Crestron C2N-IADS30X24 Intercom Audio Distribution System

Setup

Network Wiring

When wiring the network, consider the following:

• Use Crestron Certified Wire.

• Use Crestron power supplies for Crestron equipment.

• Provide sufficient power to the system.

CAUTION: Insufficient power can lead to unpredictable results or damage

to the equipment. Please use the Crestron Power Calculator to help calculate

how much power is needed for the system

(http://www.crestron.com/calculators

• For larger networks, Use a Cresnet Hub/Repeater (CNXHUB) to maintain

signal quality.

For more details, refer to “

Check Network Wiring” on page 16.

CAT5 Wiring

In addition to Ethernet applications, Category 5 (CAT5) wiring is used by Crestron

for a variety of audio and video applications.

Crestron recommends using CresCAT-IM (or D) wire or other high-quality CAT5

cable for transmitting CAT5 audio signals.

When using a Crestron wiring solution, the CresCAT-IM (or D) wire can carry audio

and video signals up to 500 feet (observe distance limitations based upon power

consumption for the touchpanel (or other device) in use). For more information, refer

to the latest version of the Crestron CAT5 Wiring Reference Guide (Doc. 6137),

which is available for download from the Crestron website.

Identity Code

The Net ID of the IADS has been factory set to 46. The Net IDs of multiple IADS

devices in the same system must be unique. Net IDs are changed from a personal

computer (PC) via the Crestron Toolbox

™

When setting the Net ID, consider the following:

• The Net ID of each unit must match an ID code specified in the SIMPL

Windows program.

• Each network device must have a unique Net ID.

For more details, refer to the Crestron Toolbox help file.

Hardware Hookup

Rack Mounting

The IADS can be mounted in a rack or stacked with other equipment. Two “ears” are

provided with the IADS so that the unit can be rack mounted. These ears must be

installed prior to mounting. Complete the following procedure to attach the ears to

the unit. The only tool required is a #2 Phillips screwdriver.

Operations Guide – DOC. 6170A Intercom Audio Distribution System: C2N-IADS30X24 • 9

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

Crestron C2N-IADS30X24 Especificações Página 13