Crestron CLS-C6 Manual do Utilizador descarregar pdf (Página 2)

CLS-C6 iLux

Integrated Lighting System

crestron.com

800.237.2041

SPECIFICATIONS

Load Ratings

Dimmer Channels: 6

Maximum Per Channel: 800 Watts/VA (6.6 Amps @ 120 Volts AC)

Minimum Per Channel: 15 Watts/VA (0.125 Amps @ 120 Volts AC)

Module Total: 1920 Watts/VA (16 Amps @ 120 Volts AC)

Load Types: LED

[1]

, Incandescent, Magnetic Low-voltage, Neon/Cold Cath-

ode, 2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic

Low-voltage, 3- and 4-Wire Fluorescent, High-Inrush Switching, & 277V

via CLS-EXP Series expansion modules - sold separately)

Power Requirements

100 to 127 Volts AC, 50/60Hz Line Power

Connections

LOCAL DEVICES: (1) 4-pin 5mm detachable terminal block;

Cresnet

Master port for local devices including:

C2N-DB and CNX-B Series keypads, 16 maximum;

C2N-SSC-2, C2N-SDC, and C2N-SDC-DC shade controllers; 16 maximum;

Additional CLS-C6 or CLS-C6M units, 8 maximum;

Additional CNPWS-75 or other Cresnet power supply required beyond 4

devices; C2N-SDC-DC always requires an additional power supply

CONTROL SYSTEM: (1) 4-pin 5mm detachable terminal block;

Cresnet Slave port for connection to a control system

HOT: (1) Captive screw terminal

[3]

, line power input

LOAD1 – LOAD6: (6) Captive screw terminals

[3]

, dimmer channel outputs

1 – 6

NEUTRAL: (1) Captive screw terminal

[3]

GROUND: (1) Captive screw terminal

[3]

PC (front): (1) 3.5mm TRS mini-phone jack, RS-232 Programming port

Controls

Buttons 1 – 6: (6) 3-position rocker pushbuttons; configurable to recall (or

toggle recall/off) individual scenes, control shades, or for master lighting or

shade control; “scene mastering” option enables manual dimming utilizing

rocker button action; also used to adjust lighting levels when in “Lighting”

mode and shade positions when in “Shades” mode; additional functionality

configurable via software

Up/Down Button: (1) 3-position rocker pushbutton; configurable for

master lighting or shade control, or as a “shift” for Buttons 1-6; additional

functionality configurable via software

ON: (1) pushbutton, recalls “On” scene

OFF: (1) pushbutton, turns all lights off

LIGHTS, SHADES: (2) Pushbuttons, select “Lights” or “Shades” modes

SAVE, CANCEL, Up Arrow, Down Arrow : (4) Pushbuttons, navigate and

execute setup functions

Reset: Recessed miniature pushbutton for hardware reset

Dimming Ramp Rate: 5 seconds (default), software adjustable 1 to 10

seconds

Scene Fade Time: 2 seconds (default), software adjustable 0 seconds to

99 minutes

LED Indicators

Scenes: (6-white) Correspond with each “Scene” Button

High/Low: (2-white) Indicate “Shift” status

ON: (1-white) Indicates “On” Scene is selected

LIGHTS, SHADES: (2-green) Indicates “Lights” or “Shades” mode is active

SAVE, CANCEL: (2-green) Correspond with “Save” and “Cancel” Buttons

MIN, SEC: (2-green) Indicates display of “Minutes” or “Seconds”

1 – 6: (6-green) 7-Segment bargraphs, indicate lighting levels and shade

positions

Numeric Display: (2-green) 8-Segment digits, indicates modes and setup

values

IR Receiver

Reception Frequency: 36 kHz

Requires CLS-IRHT8 IR remote, sold separately

Environmental

Temperature: 32° to 104°F (0° to 40°C)

Humidity: 10% to 90% RH (non-condensing)

Enclosure

Mounts in a 4-gang electrical box, 3-1/2” deep minimum

Dimensions

Height: 4.48 in (114 mm)

Width: 8.89 in (226 mm)

Depth: 2.46 in (63 mm)

Weight

1.43 lb (649 g)

MODELS & ACCESSORIES

Available Models

CLS-C6A: iLux

Integrated Lighting System, almond

CLS-C6B: iLux

Integrated Lighting System, black

CLS-C6W: iLux

Integrated Lighting System, white

Available Accessories

C2N-CBD-E-A-S: Cameo

Express Keypad, Standard Mount, Almond

Smooth

C2N-CBD-E-B-S: Cameo

Express Keypad, Standard Mount, Black

Smooth

C2N-CBD-E-W-S: Cameo

Express Keypad, Standard Mount, White

Smooth

C2N-CBD-P-A-S: Cameo

Keypad, Standard Mount, Almond Smooth

C2N-CBD-P-A-T: Cameo

Keypad, Standard Mount, Almond Textured

C2N-CBD-P-B-S: Cameo

Keypad, Standard Mount, Black Smooth

C2N-CBD-P-B-T: Cameo

Keypad, Standard Mount, Black Textured

1 2 3 4

Comentários a estes Manuais

Sem comentários

Crestron CLS-C6 Manual do Utilizador Página 2

Comentários a estes Manuais

Manuais e produtos relacionados com Interruptores com regulação Crestron CLS-C6